News

		12.09.2019 EMO 2019 Come and see the latest Highlights and Innovations in round shank tools on our booth F60 in Hall 4.

		18.01.2019 XTOP - The competence for high-alloy materials  In the XTOP brochure you will find our entire range from the areas of tapping, drilling and milling.

		14.09.2017 FAIR HIGHLIGHT EMO 2017 XTOP Program extension: Machine taps

		01.07.2017 THE ALTERNATIVE: RatioTap®-RatioDrill®-RatioMill® Our poduct range has enabled us to unify our customers’ three key purchasing criteria.

		21.09.2016 HSS-Co deep hole drill HSS-Co deep hole drill! A special developed coating for a small friction coefficient!

		21.09.2016 XTOP Drilling XTOP Twist drills with four coolant holes!

		01.02.2016 XTOP Milling | End mill with corner radius The competence for high-alloyed materials! An optimized geometry which was developed particularly for the machining of corrosion and acid-proof steels, along with a compatible coating, form the basis for WEXO solid carbide end mills of the XTOP series. INOX | HASTELLOY | TITAN | INCONEL

		05.10.2015 XTOP programm complement! Variable in stainless steels! New machine taps with variable helix!

		05.10.2015 Forming tap up to ~35HRC! Forming taps for universal application

		17.09.2015 Development of new cutting tools for stainless steels! Development of new cutting tools for stainless steels!

		10.06.2015 The new RatioTap-Catalogue 2015A Threading tools with very attractive Price-Performance-Ratio!

		10.06.2015 The new RatioMill-Catalogue 2015A Solid carbide milling tools | Shank end mills | with corner radius | Ball nose end mills | HPC-End mills | High-Feed end mills

		10.06.2015 The new RatioDrill-Catalogue 2015A Solid carbide drills | NC-Spotting drills 3xD (with and without ICS) 5xD (with and without ICS) 8xD (with ICS) 12xD (with ICS)

		25.03.2015 XTOP Tapping A new geometry, which was developed particularly for the machining of corrosion and acid-proof steels as well as high-alloy steels, along with a compatible coating, form the basis for the new generation of WEXO powder steel taps of the XTOP series! INOX | HASTELLOY | HEAT-TREATABLE STEEL | TOOL STEEL

		24.07.2013 WEXO solid carbide thread milling cutters Wherever production problems occur when using conventional taps or forming taps, thread milling provides a useful alternative. Machining is effected in one revolution with the rotating tool additionally moving in the axial direction by one pitch turn.

		05.02.2013 SYNCHRO-Taps 2013A   Universal, process-sure, fast! The new SYNCHRO-Program from WEXO!

		14.09.2012 New HPC-Multiple Flute end mills Solid carbide end mill HPC     z = 6 / 8

		14.03.2012 Deburring cutter E90TA-HM at the RatioMill-Catalogue For chamfering and deburring work pieces. Useable in a very wide range of work materials!

		02.08.2011 Deep hole drilling in new dimensions The new solid carbide deep hole drills from WEXO are now reaching 50xd!

		01.08.2011 Innovation in Micro-Machining The new solid carbide Microdrill from WEXO

		24.08.2010 New High-Feed end mill for the RatioMill - Program High-Feed carbide end mill with TiAlN+ coating. WEXO has enlarged the program of RatioMill products.

		28.06.2010 High-Performance powder metal steel taps for universal application Includes now tolerance "6GX" and short chamfer "Form E"!

		16.09.2008 SYNCHRO-Taps and new Synchro-Tapping-Holder   Universal, process-sure & fast! The new SYNCHRO-Program from WEXO! Valid from October 1st, 2008

		15.09.2008 High-Performance powder metal steel taps for universal application The new program 2008/2009 - includes also Whitworth-Pipe-Thread (G) Valid from October 1st, 2008

		01.05.2004 High-Performance with the new "PM-Endmills" from WEXO WEXO "Powder Metal Steel" End Mills for High-Performance Milling of alloyed steels as well as Ni-based and Ti-based materials.

		01.02.2004 Increase productivity by drilling stainless steels with the "UNIVERSAL-DRILL" from WEXO

		10.11.2003 Hard-Drilling and Hard-Tapping up to 70 HRC To reduce cycle times in mould and die industry with conventional machining methods is very difficult, even nearly impossible.

		10.11.2003 Process stable HSC-Hard-Milling over 10xd and smaller dia. 1,0mm Miniature Carbide End Mills with extra long neck part.